APC Network Management Card AP9617 Uživatelská příručka stáhnout pdf (Strana 20)

®®

USER’S GUIDE

network management card

Control Console

How To Log On

Overview

You can use either a local (serial) connection, or a remote (Telnet)

connection with a computer on the Management Card’s subnet to access

the control console. For an AP9618 Network Management Card, you can

also use its internal analog modem to access the control console (see

Modem (AP9618 control console)).

Use case-sensitive User Name and Password entries to log on (by default,

apc and apc, for an Administrator, or device and apc, for a Device

Manager). A Read Only User has no access to the control console.

Remote access to the control console

You can use Telnet to log on to the control console from any computer on

the same subnet as the Management Card.

1. At a command prompt, type

telnet and the Management Card’s

System IP address, and then press

ENTER. For example:

telnet 139.225.6.133

2. Enter your User Name and Password.

If you cannot remember your User Name or Password, see

How to Recover from a Lost Password.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 189 190

Žádné komentáře

APC Network Management Card AP9617 Uživatelská příručka Strana 20