APC Network Management Card AP9617 Uživatelská příručka stáhnout pdf (Strana 25)

®®

USER’S GUIDE

network management card

Main screen status fields.

• A Stat field reports the Management Card status.

Stat : P+ N+ A+

Where,

P+ indicates that the APC operating system (AOS) is Ok

N+ indicates that the network is Ok

N? indicates that a BOOTP or DHCP request cycle is in progress

N- indicates that the Management Card failed to connect to the network

N! indicates that another device uses the Management Card’s IP

address

A+ indicates that the application is Ok

A- indicates that the application has a bad checksum

A? indicates that the application is initializing

A! indicates that the application is not compatible with the AOS

• A UPS model and name field reports the status of the

UPS.

Smart-UPS 700 RM named User Ed : On Line

• The status of the probes (Thresholds) and contacts (Contact Alarms)

at any environmental monitor, including the Integrated Environmental

Monitor’s output relay (Relay) at an AP9618 or AP9619 Management

Card, is reported just above the UPS status (UPS model and name)

field.

Thresholds Ok, Contact Alarms Ok, Relay OK

The AOS should always report that the status is OK (P+); you

may not be able to access the Management Card if the AOS

is not OK. If the AOS status in not OK, see APC Worldwide

Customer Support for information about how to contact APC

technical support.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 149 150

Žádné komentáře

APC Network Management Card AP9617 Uživatelská příručka Strana 25