APC AP9608 Instalační manuál stáhnout pdf (Strana 23)

Installation Manual

SNMPv3 only. For SNMP GETs, SETs, and trap receivers, SNMPv3 uses a

system of user profiles to identify users. An SNMPv3 user must have a user

profile assigned in the MIB software program to perform GETs and SETs,

browse the MIB, and receive traps. The default settings are no authentication

and no privacy.

Note: To use SNMPv3, you must have a MIB program that

supports SNMPv3.

The Network Management Card supports SHA or MD5

authentication and AES or DES encryption.

SNMPv1 and SNMPv3. To use InfraStruXure Central or InfraStruXure

Manager to manage the Network Management Card on the public network of an

InfraStruXure system, you must have SNMPv1 enabled in the unit interface.

Read access allows InfraStruXure devices to receive traps from the Network

Management Card. Write access is required while you set the InfraStruXure

device as a trap receiver.

To enable or disable SNMP access, you must be an Administrator. Select the

Administration tab, select the Network menu on the top menu bar, and use the

access option under SNMPv1 or SNMPv3 on the left navigation menu.

FTP and SCP

You can use

FTP (enabled by default) or SCP to transfer downloaded firmware

to the Network Management Card, or to access a copy of the Network

Management Card’s event or data logs.

To use InfraStruXure Central or InfraStruXure Manager to manage the UPS,

you must have the FTP Server option enabled in the Network Management

Card interface.

To enable or disable FTP server access, you must be an Administrator. Select

the Administration tab, select the Network menu on the top menu bar, and use

the FTP Server option on the left navigation menu.

To transfer firmware, see the “File Transfers” chapter of the User’s

Guide.

To retrieve a copy of the event or data log, see the procedure “How

to use FTP or SCP to retrieve log files” in the “Logs” chapter of the

User’s Guide.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Žádné komentáře

APC AP9608 Instalační manuál Strana 23