APC KVM1116P Uživatelský manuál stáhnout pdf (Strana 119)

107KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual

For example, if the KVM switch has an IP address of 192.168.1.180, log into your router's setup program

and access the Port Forwarding (sometimes referred to as Virtual Server) configuration page. Specify

192.168.1.180 for the IP address and the port number you want opened for it (9000 for internet access,

for example).

Configuration setup can vary. Refer to the router's User Manual for specific information on configuring

port forwarding.

PPP Modem Operation

An external modem (customer supplied) is used with the KVM switch. An APC serial adapter (provided)

connects the switch to the modem.

Basic Setup. The KVM switch can be accessed through its RS-232 port using a PPP dial-in connection:

1. Set up your hardware configuration to match the diagram:

2. From your client computer, use your modem dial-in program to dial into the KVM switch's

modem.

Note: If you don't know the KVM switch modem's serial parameters, get them from

the KVM administrator.

3. Once a connection is established, open your browser, and specify 192.168.192.1 in the URL box.

4. The default username and password are blank.

5. For the modem session, the KVM switch has an IP address of 192.168.192.1; the user side has an

IP address of 192.168.192.101.

6. From here, operation is the same as if you had logged in from a browser or with the AP programs.

aem0382a

LAN 2 PDU 2

LAN 1 PDU 1

Adapter

Modem

Remote

User

Phone Line

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 133 134

Žádné komentáře

APC KVM1116P Uživatelský manuál Strana 119