APC RAID Subsystem SCSI-SATA II Uživatelský manuál stáhnout pdf (Strana 54)

- 53 -

Figure 4.4.6.3

1. Select “/ Volume configuration / Virtual disk”.

2. Click “Create”.

3. Input a VD name, choose a RG Name and enter a size for this VD; decide the

stripe height, block size, read / write mode, /jointfilesconvert/268713/bg rate, and set priority, finally click

“Confirm”.

4. Done. A VD has been created.

5. Follow the above steps to create another VD.

Figure 4.4.6.4

(Figure 4.4.6.4: Creating VDs named “VD-R5-1” and “VD-R5-2” from RAID group “RG-R5”, the

size of “VD-R5-1” is 50GB, and the size of “VD-R5-2” is 64GB. There is no LUN attached.)

Step 3: Attach a LUN to a VD.

There are 2 methods to attach a LUN to a VD.

1. In “/ Volume configuration / Virtual disk”, check the gray button next to the

VD number; click “Attach LUN”.

2. In “/ Volume configuration / Logical unit”, click “Attach”.

RAG362

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 104 105

Žádné komentáře

APC RAID Subsystem SCSI-SATA II Uživatelský manuál Strana 54