APC MGE Galaxy 300 Uživatelská příručka stáhnout pdf (Strana 33)

24Network Management Card User’s Guide

tls

Access: Administrator only

Description: Manually configure the TLS settings for the Management Card. TLS is an optional remote

monitoring service available on the MGE Galaxy 300 and MGE Galaxy 7000 UPS systems.:

Option Argument Description

-p Display the configured parameters for the tls command

-a enable | disable Enable or disable the TLS feature.

-m <slave number in hex> Identify the valid alarms that cause an alert to be sent to the TLS

service.

<call cause mask in

hex>

-t <primary | secondary> Determine what primary or secondary number to call to establish a

TLS connection. The telephone number should be configured with

country code, area code, and number. Only used for master

configuration - a slave UPS can store the information, but it will not

be used.

<telephone#>

-si <# of connected UPS> Store the number of UPS systems connected to the Master system,

and the slave IDs of each connected UPS in hexadecimal format.

<slave ID3 in hex>...

-id <slave ID in hex> Store the slave ID of the UPS in hexadecimal format.

<id> Five character unique ID of the UPS.

-d <delay in seconds> Specify delay before second connection if first attempt is

unsuccessful.

-test <appearance |

disappearance>

Create a test alarm. Only alarms specified by the Call Cause mask

will be raised.

<bit position> Specify the bit position (0 - 15) that will be set in the appearance

and disappearance register.

-initstr <apc | mge | any other

string>

Set the modem INIT string.

-dialstr <apc | mge | any other

string>

Set the modem DIAL string.

-ResetToDef Restore the default settings for the TLS feature.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 104 105

Žádné komentáře

APC MGE Galaxy 300 Uživatelská příručka Strana 33