APC NetBotz 200 Uživatelská příručka stáhnout pdf (Strana 113)

USER’S GUIDE

NetBotz Rack Monitor 200

107

How to Verify an Upgrade

Verify the success or failure of the transfer

To verify whether a firmware upgrade succeeded, use the Network menu in the control

console and select the FTP Server option to view the Last Transfer Result field, or

use an SNMP GET to the mfiletransferStatusLastTransferResult OID.

Last Transfer Result codes

Verify the version numbers of installed firmware

Use the Web interface to verify the versions of the upgraded firmware modules by

selecting the Administration tab, General on the top menu bar, and About on the left

navigation menu, or use an SNMP GET to the MIB II sysDescr OID.

Code Description

Successful The file transfer was successful.

Result not available There are no recorded file transfers.

Failure unknown The last file transfer failed for an unknown reason.

Server inaccessible The TFTP or FTP server could not be found on the network.

Server access denied The TFTP or FTP server denied access.

File not found The TFTP or FTP server could not locate the requested file.

File type unknown The file was downloaded but the contents were not recognized.

File corrupt The file was downloaded but at least one Cyclical Redundancy Check

(CRC) failed.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 124 125

Žádné komentáře

APC NetBotz 200 Uživatelská příručka Strana 113